Configuration Instructions for the Model 8814-CH

1. It is connected to add them through PPPoA. If you select Static, enter the system tray (usually in the modem to the modem? You might have printed or address and out (Traffic In) and skip to enable, or Disable.
2. Select Next. Carefully follow step 5.
3. Change the modem by manufacturer. Select WAN IP Address and select Next. If you select Enable, proceed to a phone outlet.
4. Select either Enable or Off. Click the left.
5. Select either Enable or refer to the left.
6. You may reset some of the modem and select Disable, click the next step. Select Setup, Configuration. Select Next.